Pan head drilling screw (KFR), PH head with Phillips groove PIAS
PIAS MODIFY TRUSS HEAD 4,2X16 ZINC PL
PIAS
Register now and access more than 20,000 products
Drilling, threading and screwing all in one step
Requires clearly less time and effort
Exact drilling diameter for each screw-mounting
- Minimum thread tolerance
- Always optimum mounting
- Pushed in flange generates low surface pressure, which helps in preventing tension cracks
- Contact pressure during use is approx. 100 N; if necessary, a depth regulator can be used during screwing
Drill tip screw for attaching plastic and sheet metal to metal substructures.
Zinc-coated drilling screws can only be used in areas, where no moisture is expected.
For fasteners under a building permit, the permit and Section 2, Special regulations, in particular, must always be followed.
Datasheets(X)
Type description | 4,2X16 |
Nominal diameter | 4.2 mm |
Length | 16 mm |
Material | Steel |
Surface | Zinc plated |
Min. material thickness for steel | 1.75 mm |
Max. material thickness for steel | 3 mm |
Min./max. material thickness for steel | 1.75-3.0 mm |
Head diameter | 11 mm |
Internal drive | H2 |
Drive type | Crosshead |
Product weight (per item) | 2.010 g |