Pan head drilling screw (KFR), PH head with Phillips groove PIAS
PIAS MODIFY TRUSS HEAD 4,2X13 ZINC PL
PIAS
Register now and access more than 20,000 products
Drilling, threading and screwing all in one step
Requires clearly less time and effort
Exact drilling diameter for each screw-mounting
- Minimum thread tolerance
- Always optimum mounting
- Pushed in flange generates low surface pressure, which helps in preventing tension cracks
- Contact pressure during use is approx. 100 N; if necessary, a depth regulator can be used during screwing
Drill tip screw for attaching plastic and sheet metal to metal substructures.
Zinc-coated drilling screws can only be used in areas, where no moisture is expected.
For fasteners under a building permit, the permit and Section 2, Special regulations, in particular, must always be followed.
Datasheets(X)
Type description | 4,2X13 |
Material | Steel |
Surface | Zinc plated |
Min. material thickness for steel | 1.75 mm |
Max. material thickness for steel | 3 mm |
Min./max. material thickness for steel | 1.75-3.0 mm |
Head diameter | 11 mm |
Internal drive | H2 |
Product weight (per item) | 1.800 g |
Drive type | Crosshead |
Last viewed
Fix master Blind rivet, round head
Combination pliers
Fix master Drill bit Fmx-2 SDS+ 2-cut
Fix master Wedge anchor Fix master MKT B Option 7, hot dip galvanized
Fix master Hexagon nut
Fix master Hexagon screw, countersunk head
Square neck with round pan head
Fix master Drill bit Fmx-2 SDS+ 2-cut
Tapered pin
Fix master Hexagon screw, cylinder head