Fix master Aerated concrete screw, countersunk head, TX30
LIGHT CONCR SCR CSUNK/TX30 C4(15) 8X65
FIX MASTER
Register now and access more than 20,000 products
- Coarse thread aerated concrete screw anchors are designed for push-through installations in porous base materials, such as blocks.
- Pre-drilling is not normally required. The fitting can be screwed directly to the base material through a wood block. The minimum installation depth for aerated concrete screws is 60 mm.
- No special tools are required, and there is no pre-determined tightening torque.
- A torque-controlled tool or manual final tightening should be used to avoid overtightening.
- The screws are SITAC approved for corrosivity category C4, making them suitable for indoor, outdoor and industrial use.
- Aerated concrete block
- Hollow light expanded clay aggregate block
- Solid light expanded clay aggregate block
- Battens
- Square timbers
- Sole plates
- Shelfs
- Cable racks
- Supports and mountings
Datasheets(X)
Anchor diameter | 8 mm |
Anchor length (l) | 65 mm |
Attachment height (t fix) | 5 mm |
Embedding depth (h nom) | 60 mm |
Head type | Countersunk milling pocket head |
Internal drive | TX30 |
Type description | 8X65 |
Last viewed
Hexagon screw, full thread
Fix master Chipboard screw, cylinder head, TX
Self-drilling screw, hexagon head, includes seal PIASTA A2 + RUSPERT
Fix master Slotted screw, cylinder head
Fix master Drilling screw, countersunk head, PH head with Phillips groove
Fix master Toge Screw anchors with round pan head Zinc-electroplated, TSM-P
Fix master Hexagon nut
Fix master Farmer screw, sharp tip
Hexagon screw, full thread
Fix master Hexagon head, wood screw Cap screw