Fix master Hexagon screw, full thread
DIN 933 8.8 HDG M24X200 ISO FIT
FIX MASTER
Register now and access more than 20,000 products
- Manufactured in the tolerance range 6AZ for undersize thread (thread clearance) prior to any surface treatment (EN ISO 10684).
- Bolts comply with the requirements set forth in the ISO standard for products after hot dip galvanisation.
- The bolts must not be used with nuts that have oversize threads. It could cause problems in the bolt connections and ultimately lead to the connection failing.
Datasheets(X)
Thread type x nominal diameter | M24 |
Length | 200 mm |
Width across flats | 36 mm |
Head height | 15 mm |
Type description | M24X200 |
Material | Steel |
Surface | Hot dip galvanized |
DIN | 933 |
ISO | 4017 |
Product weight (per item) | 722 g |
Drive type | Outer hexagon |
Property class | 8.8 |
Head type | Hexagon head |
Tensile strength | 800 N/mm² |
Last viewed
Fix master Toge Screw anchor with a female thread zinc-electroplated, TSM-IM
Fix master Wing nut, American type, square wings
Fix master Farmer screw, sharp tip
Fix master Drill bit Fmx-I SDS+ vacuum drill bit
Fix master Sheet metal screw, cylinder head, zinc-electroplated (finish screw)
Ring bolt, hot dip galvanised
Circlips for axles, type A
Slotted screw, oval head. suoraura
Tapping screw, round pan head, PH
Fix master Flat washer for hexagonal screws and nuts