Pan head drilling screw (KFR), PH head with Phillips groove PIAS stainless AISI410
PIAS MOD.TRUSS HEAD 4,2X19 A410 RUSP
PIAS
Register now and access more than 20,000 products
The flat head is unobtrusive and wide enough to fasten and hold on to soft or thin materials.
The point drills into metal quickly and effectively without a pilot hole, saving time.
Material stainless steel AISI410
- Pushed in flange generates low surface pressure, which helps in preventing tension cracks
- Contact pressure during use is approx. 100 N; if necessary, a depth regulator can be used during screwing
Drill tip screw for attaching plastic and sheet metal to metal substructures.
Drill screws made of hardened AISI 410 martensitic stainless steel are not recommended for fastening aluminium pieces. In such case, choose austenitic stainless steel A2 as the screw material.
Datasheets(X)
Type description | 4,2X19 |
Nominal diameter | 4.2 mm |
Length | 19 mm |
Material | Stainless steel AISI 410 |
Surface | Flake zinc |
Min. material thickness for steel | 1.0 mm |
Max. material thickness for steel | 2.5 mm |
Min./max. material thickness for steel | 1.0-2.5 mm |
Head diameter | 11 mm |
Internal drive | H2 |
Drive type | Crosshead |
Flange diameter | 11 mm |
Product weight (per item) | 2.220 g |