Bracket, symmetric
ANGLE BRACKET 70X70X55X2,5
Register now and access more than 20,000 products
- Hot dip galvanised sheet metal on both sides (DX51D + Z275 [approx. 20 µm]), in accordance with EN 10327:2004 standard
- Use classes 1 and 2 according to EN 1995:2013 standard
For concrete fixings according to standard ETA 09/0214, 0681050040 0681090040 0681090065
The bending load of fixed wood materials must be considered, and the structure should be reinforced, if necessary.
The diameter of bolts / screws / metal anchors must be max. 2 mm smaller than the hole diameter.
Basic requirements set forth in the certification of the used anchor must be followed.
Datasheets(X)
Type description | 70/70/55/2,5 |
Width | 55 mm |
Height | 70 mm |
Length | 70 mm |
Material | Aluzinc structural steel, 1.0242 |
Thickness | 2.5 mm |
Surface | Hot dip galvanized |
Last viewed
Fix master Hexagon screw, partial thread
Lock washer
O-ring
Hexagon screw, partial thread, for pressure vessel applications (PED)
Fix master Chipboard screw, countersunk head, full thread
Hexagon screw, cylinder head
Two-way drill bit, HSS
Circlip for hole
Anchor rod
Drilling screw, hexagon head PIAS