Frame anchor Sormat RU, stainless
72756 RU M8X285
SORMAT
Art.-no.
77808 285
EAN 6416031727566
Prices for customers after login
Exclusively for trade customers
Register now and access more than 20,000 products
- Heat insulation, supports and coatings installed during renovation increase the load on the old outer layer of the element and move the centre of the gravity outwards.
- If there are concerns about the durability of the old truss and other fixings, the connection of the outer layer to the inner layer should be ensured with additional anchoring.
- This system makes it possible to support the damaged outer layer of the element, provide additional support against compression forces and transfer the stresses to the inner layer.
- The PH M8 strain anchor is used together with frame anchor RU M8 in situations where the trusses and/or insulating structures of the element can no longer withstand compression forces.
- The system is manufactured from stainless steel.
- This is the only product in Finland that has a product declaration confirmed by Betoniyhdistys ry.
Application areaFaçade renovations
Product information
Datasheets(X)
Type description | M8X285 (pack 100 pcs) |
Material | Stainless steel A2 |
Product weight (per item) | 124.000 g |
Anchor diameter | 8 mm |
Anchor length (l) | 285 mm |
Nominal drill-bit diameter (d 0) | 14 mm |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!