Pan head drilling screw (KFR), PH head with Phillips groove PIAS
SELF DRILLING SCREW 4,2X25 BLACK ZINC PL
PIAS
Art.-no. 213114225
EAN 6417926209327
Register now and access more than 20,000 products
Drilling, threading and screwing all in one step
Less time and effort
Exact drilling diameter for each screw joint
- Minimum thread tolerance
- Always optimum mounting
- Pushed in flange generates low surface pressure, which helps in preventing tension cracks
- Contact pressure during use is approx. 100 N; if necessary, a depth regulator can be used during screwing
Drill tip screw for attaching plastic and sheet metal to metal substructures.
Zinc-coated drilling screws can only be used in places, where no moisture is expected.
For fasteners under a building permit, the permit and Section 2, Special regulations, in particular, must always be followed.
Datasheets(X)
 | |
Type description | 4,2X25 |
Nominal diameter | 4.2 mm |
Length | 25 mm |
Material | Steel |
Surface | Zinc plated black |
Min. material thickness for steel | 1.75 mm |
Max. material thickness for steel | 3 mm |
Min./max. material thickness for steel | 1.75-3 mm |
Head diameter | 11.0 mm |
Internal drive | H2 |
Drive type | Crosshead |
Product weight (per item) | 2.500 g |